圓錐螺紋塞規測量方法綜述

劉興榮 張小希 馬桂茹 張博
北京市計量檢測科學研究院,北京100029
摘　要:隨著現代工業的發展，對圓錐螺紋塞規的加工精度提出了更高的要求，如何提高圓錐螺紋塞規的測量準確度成為必須解決的重要課題。本文以接觸式測量和非接觸式測量分類方法為例，對比分析了國、內外現有的多種圓錐螺紋塞規基面中徑測量方法及研究現狀，認為利用CCD作為螺紋幾何要素探測器件的視覺檢測技術將是未來的發展趨勢，隨著模式識別、圖像處理等相關技術的進步，隨著機器視覺技術自身的成熟和發展，視覺檢測技術將得到更為廣泛的應用。[著者文摘]

Survey of Measurement Method of Taper Thread Plug GaugeLIU Xing-rong, ZHANG Xiao-xi, MA Gui-ru, ZHANG Bo Beijing Institute of Metrology, Beijing 100029, ChinaAbstract:With the development of industry, there are more requirements of accaracy of taper thread plug gauge＇s manufacture. How to im- prove the precision of measuring is an important problem. In this article, we analyze the contact measurement and non-contact measurement for taper thread plug gauge, and the think that using CCD vidicon to detect and measure taper thread plug gauge is a new non-contact measurement method, with the development of machine vision, mode distinguish, image processing and so on, this new method will be used in more fields.[著者文摘]

Key words:taper thread plug; base level pitch diameter; contact measurement ; non-contact measurement